NEED PROTECTION FOR
YOUR EQUIPMENT?
Built to the highest standards, Peli Storm Case™ is a tough range of IP67 certifi ed, injection moulded cases. Made with high performance, lightweight HPX™ resin, these impact resistant equipment cases are extremely durable even at very low temperatures.
No matter the size or shape, there´s a Peli Storm Case for any kind of sensitive equipment. From small waterproof cases for delicate equipment, such as cameras or defi brillators, to big sized cases with wheels for easy of transport, to deeper sized cases to house drones.
PELI STORM CASE™ -
A WIDE RANGE FOR EVERYONE’S NEEDS
- MAINTENANCE AND INDUSTRIAL ENGINEERING
Protection from shocks, heat, dust and chemicals is imperative when it comes to protecting valuable engineering and maintenance tools, such as pressure gauges, tachometers, calibrators and data logging equipment. Peli Storm cases off er all that and more! The cases can also be customized into a reliable, ready-to-ship enclosure for electronic installations and many models can be adapted for use with electronic interface panels by using a bezel kit.
- SCIENCE, EMS, POLICE AND MILITARY
Peli Storm cases are constantly tested by professionals under the toughest conditions on earth and are the trusted choice to accommodate all kind of sensitive laboratory equipment,scientifi c tools, analytical instrumentation and heavy-duty communication systems. The customizable interiors of a Peli Storm protective case will ensure your vital equipment will arrive fully operational. Peli Storm cases have passed the strictest Military tests MIL-STD-810F, FED-STD-101C, as well as ATA 300.
- PHOTOGRAPHY, BROADCAST AND DRONES
On set or on the go, you can rest assure your valuable photographic or electronic equipment will be extremely well protected inside a Peli Storm case. The diff erent internal confi gurations will allow you to create snug nests for your sensitive cameras, fl ashes or lenses and the optional lid mesh pockets are the perfect organizers for cables and cords. The deeper sized models are perfect to house all kind of drones. With its silent Press & Pull latches and its smooth rounded design Peli Storm Cases are preferred by professionals working in fashion or wildlife photography.
- TRAVEL, NAUTIC AND OUTDOOR
A wide range of ATA compliant hard cases, will allow you to travel safe with your gear, no matter what! Not only do we have the right case for travellers to protect sensitive electronics, such as laptops or tablets, we also off er waterproof (trolley) cases to protect larger equipment during extreme adventures. The Vortex® pressure release valve will make sure your case stays clean in the Gobi Desert and dry on the Nile river.
BUILT TO THE HIGHEST STANDARDS
MULTIPLE INTERIOR CUSTOMISATION OPTIONS
Interior protection is available through different type of systems, which will allow you to adapt the interior according to the shape of your equipment.
NEW! Trekpak™ - THE VERSATILE DIVIDER SYSTEM FOR THE ULTIMATE CASE
You’ve always trusted Peli™ to protect your sensitive gear Now with our exclusive TrekPak™ system you can kit out your case with the precision your equipment deserves.
TrekPak™ is available as an accessory for a selection of Peli Storm Cases™ - iM2200, iM2300, iM2400, iM2450, iM2500, iM2600, iM2620, iM2720, iM2950
- THE CUTTING EDGE
Trimming the dividers to length is a snap. TrekPak’s exclusive double blade tool has a centre guide that tracks in the corrugated centre. Just place the tool in any hole and pull. The blades follow the slot for a perfectly straight cut every time.
- CHANGE IT UP
Reusable and modular dividers for future modifi cations.
From the top:
- Convoluted Lid Foam
- TrekPak System
- TrekPak Wall Foam
- Bottom Foam
- Peli
- CLEAN AND STRONG
The TrekPak system uses pre-installed wall sections, divider panels, locking pins and an infallible cutting tool. Just lay your gear in the case, measure and cut the divider sections and lock them in place with the steel U-pins. We include extra divider material so you can change your mind, 
plus divider panels are also available separately so you can reconfi gure your dividers anytime.
The results are impressive. The divider sections are manufactured from waterproof, closed cell foam that is laminated to a rigid corrugated plastic panel. Light, strong and almost impossible to tear or shred, these panels will keep your gear safe for years.
Foam Solutions
All Peli Storm Cases, except iM3100, iM3200, iM3220, iM3300 and iM3410, come standard with the exclusive “Pick N Pluck™” foam. This foam is pre-cut into small cubes of 1 cm, allowing you to easily pluck away the cubes to fit in your device. A very simple and eff ective way to customise the interior of the case according to the shape of your equipment.
For exceptionally fragile or expensive equipment, Peli also off ers custom-cut foam, created based upon the CAD drawings and the characteristics of the item that needs to be protected. The correct foam must support the mass load and still cushion sensitive equipment from impact forces. There are numerous foam properties that infl uence foam selection from anti-bacterial foam, which is helpful for preventing mould growth in humid environments, to anti-static foam which protects delicate electronics.
Padded dividers & lid organisers
- PADDED DIVIDERS
- LID ORGANISERS
ADAPT YOUR ELECTRONIC PANEL
Peli Storm cases have evolved over the years to accommodate the needs of electronic engineers and their OEM projects. Injection moulding provides a reliable, durable, ready-to-ship enclosure with consistent dimensions. The co-polymer material can be machined and drilled, and also fi les and sands well.
These properties make the Peli Storm Case well suited for customisation such as mounting bulkhead connectors, while maintaining a clean, professional appearance. Attaching equipment to the interior is equally simple by use of typical fasteners and mounting hardware. The hardware can be made water-tight by use of small o-rings, rubber washers or silicone.
- BEZEL KITS
A selection of Peli Storm cases can be adapted for use with electronic interface panels by using a Bezel Kit. Pre-drilled holes and stainless steel screws make fabricating a custom case a fast and accurate proposition.
A polymer o-ring seals the panel so the base of the case remains watertight, even with the lid open.
The interior of the lid is also commonly used to attach accessories such as a wiring race, device holster or Peli’s optional lid organiser sets. Select larger cases off er mounting bosses inside the lid for use with screw fasteners.
